ACRYSHIELD

Product description

acryshield Washable – Paintings Walls A superior acrylic based finish emulsion with excellent adhesion properties, suitable for all internal as well as external surfaces of wood, plaster, hardboard and cement

Properties and Areas of Use

– Good coverage.
-Gives durable and non yellowing surfaces.
-Washable with water and soap 100%.
-Allows water evaporation.
Technical & General Information @ 25ºC:
Finish                                                   Matt
Color Range                                        As per color card
Dry Film Thickness (DFT)              25-50 microns
Theoretical Spreading Rate             14.4 m²/L @ 25 µm depending on surface porosity
Solid Volume                                      36 ± 2%
Specific Gravity                                    1.4
Touch Dry                                             30 minutes
Recoat Interval                                    6 hours
Shelf Life                                               12 months in good storage conditions
Application Conditions:
All surfaces must be free from contamination & dust and properly prepared with fungicidal
solutions if necessary. Substrate temperature should be 10º C or above for application and
during cure, and a minimum of 3º C above the dew point.
Surface Preparation:
– One coat of Colorama  Primeseal
– One or two coat of UNO – Plastic Putty
Thinning and Application:
Thinning should only take place after the material has been thoroughly mixed.
 10-20% water for application with brush, roller or conventional air spraying.
 5-15% water for airless spraying.
Storage:
Store away from direct sunlight at ambient temperatures and in dry conditions.
Packing:                                                       10 L

ACRYSHIELD Washable – Paintings Walls