Product description
CERACOL- Texture – Multicolor – granite or natural stone-like finish, for exterior as well as interior decorative use. It is used to weatherproof facades and gives it a granite or stone like finish with rough texture
Properties and Areas of Use
-Excellent coverage.
-Gives durable and non yellowing surfaces.
-Washable with water and soap 100%.
-Allows water evaporation.
-Good sun light diffraction.
Technical & General Information @ 25ºC:
Finish Flat
Color Range As per color card
Dry Film Thickness (DFT) 1.5-3 mm in 1 coats
Theoretical Spreading Rate 1.5-3 Kg/m per coat depending on surface porosity and DFT
Solid Volume 75 ± 2%
Specific Gravity 1.8
Touch Dry 2 hours
Recoat Interval 24 hours
Shelf Life 12 months in good storage conditions
Application Conditions:
All surfaces must be free from contamination & dust and properly prepared with fungicidal solutions if necessary. Substrate temperature should be 10º C or above for application and during cure, and a minimum of 3º C above the dew point.
Surface Preparation:
– One coat of Colorama Primeseal
Thinning and Application:
Thinning should only take place after the material has been thoroughly mixed. A maximum of (0.5 – 1.0) liter of water per 25 Kg.
– Apply 1 coat of Colorama PRIMSEAL .
-Apply first layer of CERACOL using metal trowel.
-If gloss finish needed you may apply extra coat if PRIMESEAL (B).
Storage:
Store away from direct sunlight at ambient temperatures and in dry conditions.
Packing: 20 Kg Bags
CERACOL- Texture – Multicolor – Granite
Reviews
There are no reviews yet.