PRIMESEAL

An excellent acrylic based sealer coat with superior adhesion properties, suitable for all internal & external surfaces of wood, plaster, hardboard and cement render.

Category:

Properties and Areas of Use
 Strengthens all weak surfaces.
 High coverage and economic, reducing the usage of subsequent coats.
 Offers durable surfaces resistant to humidity and alkali.
Technical & General InformaƟon @ 25ºC:
Color Range                                                 Transparent or White
Theoretical Spreading Rate                      10-12 m²/L per coat depending on surface porosity and DFT
Specific Gravity                                           1.00
Touch Dry                                                     30 minutes
Recoat Interval                                           2 hours
Shelf Life                                                      12 months in good storage condiƟons
Application Conditions:
All surfaces must be free from contamination & dust and properly prepared with fungicidal
solutions if necessary. Substrate temperature should be 10º C or above for application and
during cure, and a minimum of 3º C above the dew point.
Thinning and Application:
Thinning should only take place after the material has been thoroughly mixed.
 50% water for porous or weak surfaces. Applied with roller or by spraying.
 100% water for good surfaces applied with roller or by spraying.
Storage:
Store away from direct sunlight at ambient temperatures and in dry conditions.
Packing:                                     5 L or 20 L

Reviews

There are no reviews yet.

Be the first to review “PRIMESEAL”

Your email address will not be published. Required fields are marked *

Shopping Cart
Open chat
1
Scan the code
Hello
Can we help you?