COLAST Satin SUPER SEMI -GLOSS EMULSION

Product description

COLAST Satin Semi-gloss Emulsion – Washable acrylic based emulsion with excellent adhesion properties, suitable for all internal as well as external surfaces of plaster and cement render

Properties and Areas of Use

-Excellent coverage.
-Gives durable and non yellowing surfaces.
– Environmentally friendly as water based paint
– Allows water evaporation.
– Excellent opacity and excellent washability.
Technical & General Information @ 25ºC:
Finish                                                    Semi-gloss
Color Range                                          As per color card
Dry Film Thickness (DFT)                 25-100 microns
Theoretical Spreading Rate               11-12 m²/L depending on DFT and surface porosity
Solid Volume                                        35 ± 2%
Touch Dry                                              45 minutes
Recoat Interval                                      6 hours
Shelf Life                                                 12 months in good storage conditions
Application Conditions:
All surfaces must be free from contamination & dust and properly prepared with
fungicidal solutions if necessary. Substrate temperature should be 10º C or above for
application and during cure, and a minimum of 3º C above the dew point.
Surface Preparation:
 One coat of JOKER – Acrylic Sealer
 Two coats of UNO – Exterior Putty or JOKER – Plastic Putty.
Thinning and Application:
Thinning should only take place after the material has been thoroughly mixed.
 10-20% water for application with brush, roller or conventional air spraying.
 5-15% water for airless spraying.
Storage:
Store away from direct sunlight at ambient temperatures and in dry conditions.
Packing:                                           9 L

COLAST Satin Semi-gloss Emulsion – Washable