ACRYSHIELD Satin Semi-gloss Emulsion – Washable acrylic based finish emulsion with excellent adhesion properties, suitable for all internal as well as external surfaces of wood, plaster, hardboard and cement render.
Properties and Areas of Use
– Good coverage.
– Gives durable and non yellowing surfaces.
– Washable with water and soap 100%.
– Allows water evaporation.
Technical & General Information @ 25ºC:
Color Range As per color card
Dry Film Thickness (DFT) 50-100 microns
Theoretical Spreading Rate 7-9 m²/kg per coat depending on surface porosity and DFT
Solid Volume 48 ± 2%
Specific Gravity 1.25
Touch Dry 30 minutes
Recoat Interval 6 hours
Shelf Life 12 months in good storage conditions
All surfaces must be free from contamination & dust and properly prepared with fungicidal solutions if necessary. Substrate temperature should be 10º C or above for application and during cure, and a minimum of 3º C above the dew point.
One coat of Colorama Primeseal
One or two coat of UNO – Plastic Putty
Thinning and Application:
Thinning should only take place after the material has been thoroughly mixed.
10-20% water for application with brush, roller or conventional air spraying.
5-15% water for airless spraying.
Store away from direct sunlight at ambient temperatures and in dry conditions.
Packing: 10 L
ACRYSHIELD Satin Semi-gloss Emulsion – Washable