COLAST Emulsion – Washable IS superior acrylic based matt emulsion paint with outstanding washability , adhesion, hiding power and color retention properties., suitable as finish coat for all exterior and interior surfaces of wood, plaster, hardboard and cement render.
Properties and Areas of Use
– Excellent coverage and hiding power.
– Gives durable and non yellowing surfaces.
– Environmentally friendly as water based paint
– Allows water evaporation.
– Outstanding Dirt Pickup Resistance and washability.
Technical & General Information @ 25ºC:
Color Range As per color card
Dry Film Thickness (DFT) 25-100 microns
Theoretical Spreading Rate 11-12 m²/L depending on DFT and surface porosity
Solid Volume 40 ± 2%
Touch Dry 30 minutes
Recoat Interval 4 hours
Shelf Life 12 months in good storage conditions
All surfaces must be free from contamination & dust and properly prepared with fungicidal solutions if necessary. Substrate temperature should be 10˚C or above for application and during cure, and a minimum of 3˚C above the dew point.
– One coat of COLAST Primer
– Two coats of UNO – Exterior Putty or JOKER – Plastic Putty.
– Two Coats of COLAST
Thinning and Application:
Thinning should only take place after the material has been thoroughly mixed.
10-20% water for application with brush, roller or conventional air spraying.
5-15% water for airless spraying.
Store away from direct sunlight at ambient temperatures and in dry conditions.
Packing: 9 L
COLAST Emulsion – Washable