SMART – Economic Emulsion Paints

SMART – Economic Emulsion Paints

An economic acrylic based emulsion with good adhesion properties, suitable as undercoat or economic finish coat for all internal surfaces

Properties and Areas of Use

– Good coverage.
-Gives durable and non yellowing surfaces.
-Environmentally friendly as water based paint
-Allows water evaporation.

Technical & General Information @ 25ºC:

Finish                                                   Matt
Color Range                                        As per color card
Dry Film Thickness (DFT)               50-100 microns
Theoretical Spreading Rate             4-6 m²/kg per coat depending on surface porosity and DFT
Solid Volume                                      65 ± 2%
Touch Dry                                           30 minutes
Recoat Interval                                  6 hours
Shelf Life                                             12 months in good storage conditions

  Application Conditions:

SMART – Economic Emulsion Paints All surfaces must be free from contamination & dust and properly prepared with fungicidal solutions if necessary. Substrate temperature should be 10º C or above for application and during cure, and a minimum of 3º C above the dew point

 Paints Surface Preparation:

– One coat of JOKER – Acrylic Sealer
-Two coat of JOKER – Acrylic Putty
– Two coat of SMART – Economic Emulsion

Thinning and Application:
Thinning should only take place after the material has been thoroughly mixed.
 10-20% water for application with brush, roller or conventional air spraying.
 5-15% water for airless spraying.
Storage:
Store away from direct sunlight at ambient temperatures and in dry conditions.
Packing:                                  7 L & 18 Kg