3D TOPCOAT

Product description

3D TOPCOAT – 3D Flooring – Floor Coatings A solvent free two pack polyamine cured epoxy clear coat designed to be used as a finish coat in the fields of water tank lining, steel structures, anti-chemicals flooring, fuel tank lining and crude oil tank lining and as an adhesive for wood

Properties and Areas of Use

– Tough hard wearing film
-Excellent chemical resistance
-Excellent water resistance
-Suitable for heavy duty floors of, for example, Warehouses, Factories, hangers, manufacturing plants, Garages ….etc.

Technical Coating Data @ 25 °C for mixed material

Finish                                                                        High-gloss

Color Range                                                             Transparent

Solids Volume                                                          99 ± 1%

Dry Film Thickness Range                                    100-500 µm

Theoretical Spreading Rate                                  5 m² / L @ 200 microns DFT
(loss factors will apply in practice)
Surface Dry                                                              6 hours

Recoat Interval                                                      16 hours minimum

Complete Cure                                                        7 days
Pot Life                                                                     1 hours
Flash Point                                                             >100°C
Shelf Life                                                                 12 months (stored in a cool dry place)
Mixing Ratio by Weight                                      5 Base component
3 Activator Component

Film Thickness and Spreading Rate:

                                                                  Minimum                                      Maximum                                          Typical
Film thickness, dry (µm)                              100                                               500                                                    200
Film Thickness, wet(µm)                              100                                                500                                                    200
Theoretical Spreading Rate (m2/L)           10                                                    2                                                          5

Suitable Surfaces

-Suitable for concrete floors and marine decks
-Steel marine decks must be sand blasted to SIS-Sa 21/2 minimum
-Concrete surface prepared by using dust free captive blasting units, grinding equipment, sand blasting or high pressure water jetting
-This is critical for achieving the right surface profile prior to paint application.

Application Conditions

Substrate temperature should be 10°C or above for application and during cure and a minimum of
3°C above the dew point. Adequate dry air ventilation is recommended for optimum drying.

Application Information

Component A ( base ) must be thoroughly mixed before adding components B & C.

Brush and Roller

Stiff nylon brush or spiked roller.

Cleaning Thinner

Equipment should be cleaned immediately after use with Paint Thinner Colorama TH907EP.

Drying time:

Drying times are affected by air ventilation, temperature, film thickness and number of coats.
Substrate Temp.                                      10° C                                          25° C                                             40° C
Surface Dry                                                 10                                                6                                                     4
Through Dry                                               16                                               12                                                     8
Dry to recoat, minimum                          24                                               16                                                   12
The given data serve as guideline only. The actual drying time differs according to film thickness,
ventilation, humidity and underlying paint system.

Typical paint system:

• 3D Primer
  3D Basecoat
  3D Poster
  3D Topcoat

Storage:

Keep the containers in a dry, cool, well ventilated space and away from source of heat and ignition. Containers must be kept tightly closed.

Handling:

Handle with care. Stir well before use.
Packing Size:                                                   5 L & 18 L

Summary Safety Information

-Avoid inhalation of spray mist and skin contact by the use of masks, gloves and other personal protection. Eyes should be cautiously washed with water or proprietary wash, and medical attention obtained. Skin should be thoroughly washed using a cleanser and soap and
water.
-Product is flammable
-No sparks or flames
-No smoking

3D TOPCOAT – 3D Flooring – Floor Coatings