ACRYSHIELD Satin

Product description

ACRYSHIELD Satin Semi-gloss Emulsion – Washable acrylic based finish emulsion with excellent adhesion properties, suitable for all internal as well as external surfaces of wood, plaster, hardboard and cement render.

Properties and Areas of Use

– Good coverage.
– Gives durable and non yellowing surfaces.
– Washable with water and soap 100%.
– Allows water evaporation.

Technical & General Information @ 25ºC:

Finish                                                      Semi-gloss
Color Range                                           As per color card
Dry Film Thickness (DFT)                  50-100 microns
Theoretical Spreading Rate                7-9 m²/kg per coat depending on surface porosity and DFT
Solid Volume                                          48 ± 2%
Specific Gravity                                      1.25
Touch Dry                                               30 minutes
Recoat Interval                                       6 hours
Shelf Life                                                 12 months in good storage conditions

Application Conditions:

All surfaces must be free from contamination & dust and properly prepared with fungicidal solutions if necessary. Substrate temperature should be 10º C or above for application and during cure, and a minimum of 3º C above the dew point.

Surface Preparation:

 One coat of Colorama Primeseal
 One or two coat of UNO – Plastic Putty

Thinning and Application:

Thinning should only take place after the material has been thoroughly mixed.
 10-20% water for application with brush, roller or conventional air spraying.
 5-15% water for airless spraying.

Storage:

Store away from direct sunlight at ambient temperatures and in dry conditions.
Packing:                                 10 L

ACRYSHIELD Satin Semi-gloss Emulsion – Washable