ACRYLTEX TEXTURED EXTERIOR EMULSIONA superior acrylic based textured emulsion, suitable for all external surfaces of wood, plaster, hardboard and cement render. Available in different size particles
Properties and Areas of Use
– Good coverage.
– Gives durable and non yellowing surfaces.
-Washable with water and soap.
– Allows water evaporation.
Technical & General Information @ 25ºC:
Color Range As per color card
Dry Film Thickness (DFT) 100-300 microns
Theoretical Spreading Rate 1.5 m²/kg per coat depending on surface porosity and DFT
Solid Volume 65 ± 2%
Touch Dry 2 hours
Recoat Interval 6 hours
Shelf Life 12 months in good storage conditions
ACRYLTEX TEXTURED EXTERIOR EMULSION
All surfaces must be free from contamination & dust and properly prepared with fungicidal
solutions if necessary. Substrate temperature should be 10º C or above for application and
during cure, and a minimum of 3º C above the dew point.
– One coat of JOKER – Acrylic Sealer
Thinning and Application:
Thinning should only take place after the material has been thoroughly mixed.
– 0-5% water for application sponge roller.
-0-10% water for airless spraying.
TEXTURED EXTERIOR EMULSION Store away from direct sunlight at ambient temperatures and in dry conditions.
Packing: 18 Kg, 25 Kg & 200 Kg