ACRYSHIELD (B) Satin Semi-gloss Emulsion anti-bacterial, anti-fungi, anti-condensation Walls and Ceilings acrylic based finish emulsion with excellent adhesion properties, suitable for all internal as well as external surfaces of wood, plaster, hardboard and cement render.
Properties and Areas of Use
– Good coverage.
– Gives durable and non yellowing surfaces.
– Washable with water and soap 100%.
– Good resistance to a wide range of positive and negative bacteria as well as fungi to be safely used in hospitals, clinics, swimming pools’ facilities, food processing plant and pharmaceutical plants.
Technical & General Information @ 25ºC:
Color Range As per color card
Dry Film Thickness (DFT) 50-100 microns
Theoretical Spreading Rate 10-12 m²/L per coat depending on surface porosity and DFT
Solid Volume 48 ± 2%
Touch Dry 45 minutes
Recoat Interval 6 hours
Shelf Life 12 months in good storage conditions
All surfaces must be free from contamination & dust and properly prepared with fungicidal solutions if necessary. Substrate temperature should be 10º C or above for application and during cure, and a minimum of 3º C above the dew point.
PRIMESEAL – Acrylic Sealer 1 coat
ACRYSHIELD (B) Satin 2 coats
Acrylic wall putty may be used depending on the smoothness of the surface.
Thinning and Application:
Thinning should only take place after the material has been thoroughly mixed.
10-20% water for application with brush, roller or conventional air spraying.
5-15% water for airless spraying.
Store away from direct sunlight at ambient temperatures and in dry conditions.
Packing: 9 L
ACRYSHIELD (B) Satin Semi-gloss Emulsion