COOLDECK – Decorative Flooring – Floor Coatings – Cold Floor A superior Polymer Modified Cementations coating for pool decks. It is a two component coating that requires only on site mixing to form the ideal product to resurface concrete and other construction materials giving an anti slip character.
Properties and Areas of Use
– Excellent adhesion. Bonds to porous and non-porous surfaces.
-Breathable – whilst repelling water, allows substrate to breathe.
Technical & General Information @ 25ºC:
Color Range RAL colors
Dry Film Thickness (DFT) 100 microns per coat
Theoretical Spreading Rate 3 m²/kg per coat depending on DFT
Touch Dry 1 hour
Recoat Interval 3 hours
Shelf Life 12 months in good storage conditions
All surfaces must be free from contamination & dust and properly prepared. Cool Deck is supplied in pre-measured units and should be mixed on site in clean containers. Slowly add the powder to the liquid and mix, using a slow speed drill fitted with a suitable paddle. MIX AND USE. Do not mix more material than can be used in one hour.
Damp down the concrete surface with clean water. Whilst damp, but free of standing water, apply using a short, stiff bristle brush or roller, or alternatively sprayer. Where more than one coat is found necessary to achieve the desired thickness, apply the second or subsequent coats after the previous coat has just dried. Cool Deck provides a nice surface finish, texture dependent on method of application. It is however compatible with most coatings. Colorama’s Abrafloor is recommended in case UV resistance is required.
Store away from direct sunlight at ambient temperatures and in dry conditions. Store away from direct sunlight at ambient temperatures and in dry conditions.
Packing: Units of 30 kg
COOLDECK – Decorative Flooring – Floor Coatings – Cold Floor